Today I´m gonna show you how to use a usb pen drive as a virtual RAM.
The pen drive I used is a 2 Gb from Kingston. The size should be less than 4 Gb.
When you look at the sreenshots below you have to consider that it is in German.
Step 1:
Rename your pen drive  as "RAM DRIVE", so you can see that it is the one which is used as RAM.
Step 2:
Delete all the stuff one the pen drive. Look also after hidden once.

Step 3:
Right click on "My Computer" --> Properties

Step 4:
click on "Advanced" --> system output "Settings"

Step 5:

click on "Advanced" -->  "Edit"

Step 6:

Click on your thumb drive above  --> "user-defined size"  -->
you can see the size of your flash drive (in this case 1932 Mb)
calculate: size of flash drive - 5 Mb
in this case: 1932 - 5 = 1927
Now type this number in the first box. In the second box you type in the same number (see picture) -->
click "set" and "OK"

Step 7:
Click "Apply", click not "Cancel" or  "OK".
After you have clicked "Apply", click "OK".
Restart your computer.

Warning:
Don´t pull out your thumb drive after you made this settings, because it´s used as virtual RAM device. It may crash your computer if you pull out your thumb drive. I´m not responsible for thoose cases.

If your computer didn´t get really faster or you have other reasons to remove the USB thumb drive than take the following steps:

Go to step 6 and choose your USB thumb drive, than click "no swapfile" --> "Set" -->"OK" --> "Apply"

Check out how to turn flash/pen drive into virtual ram 

Hit +1 or LIKE on fb to thank us!