How TO Boost your computer's RAM in a second.

Looking For Speed Up RAM?? Yeah Here You Can Learn How To Speed Up Your Computer RAM.
Just Follow This Steps :

Step One: Open up Notepad (it's in Accessories)

Step Two: Type in MYSTRING=(80000000)

Step Three: Save the file as MEMORY.VBE (or RAM.VBE if you like...just remember the .VBE)

Step Four: Make sure you save the file to your DESKTOP.

Step Five: Just double-click the newly created file on your desktop whenever your PC seems sluggish. It will give your RAM a much needed boost.

If you have less than 128mb of RAM (is that possible these days?) change the 80000000 to 160000000 and it should work the same.
Thanks....:)

If you like our post please share it with your friends.

How To Increase Computer RAM

LookinG For Increasing RAM?? Yeah You can increase Virtual memory - but you may want to consider upgrading to a new computer or increasing your RAM.

Virtual memory is simulated RAM. When you have use up all your RAM, your computer will shift data to an empty space on the hard drive. Computer swaps data to the hard disk and back to your RAM as needed. When you increase your virtual memory you are increasing the empty space that is reserved for your RAM overflow.

You can easily increase virtual memory by following the steps below.

1.Click Start, and then click Control Panel.

2.Click Performance and Maintenance, and then click System.

3.On the Advanced tab, under Performance, click Settings.

4.On the Advanced tab, under Virtual memory, click Change.

5.Under Drive [Volume Label], click the drive that contains the paging file that you want to change.

6.Under Paging file size for selected drive, click to Custom size check box. You can enter the amount of memory you would like to reserve for Virtual memory by entering the initial and maximum size.

7.Click Set
When you are prompted to restart the computer, click Yes.
Special Note: You should choose the same amount for the initial size and maximum size. This will Stop your CPU from constantly changing the paging file.

Share your Experience with us, comment below.

How To Increase Speed of Pen Drive

To use this Trick just follow the simple Steps:

• Connect the USB or Pen Drive to Computer.
• Open My Computer  >>  Right Click USB or Pen Drive  >>  Properties.
• Then on the Hardware Tab select the USB or Pen Drive connected and then click Properties  >>  Policies Tab.
• Now select "Optimize for Performance" Option rather than "Optimize for Quick Removal" and click Ok.
• Now just Format the USB or Pen Drive with NTFS File System by Selecting Format Option from the Drop Down Menu of Formatting.

  Now it is done.

How to hack websites By using SQL Injection

Today i am GOing to Describe What the SQL Injection IS and How It will Going to help in Hacking the Websites..
I was Asked By Warious Users To Write A Turotial About
HOW TO HACK THE WEBSITES?
Today I am Going to Discuss the Easiest Way to hack the Websites i.e SQL Injection Techniques.
We Will Use The Software SQLI Helper to Perform This. I have provided link for software download... just read on.

How to hack website using SQLI Helper:
SQLI Helper is handy software to hack website. You don't need to have any knowledge of SQL to hack website using SQLI Helper. Just follow the guidelines below:


1. Free DownLoad SQLI Helper to hack websites.

2. Unzip the file to obtain SQLI Helper to hack website.

3. Now, when you have website hacking software, you need to find website with potential vulnerability. There are some websites that are unhackable. While finding hackable websites, it is better to search for sites with format "article.php?id=[number]" in url.

Lets consider one example which I will use in this article:

http://encycl.anthropology.ru/article.php?id=1

Check whether your searched victim site can be hacked by entering:

http://encycl.anthropology.ru/article.php?id='1

in address bar and hit enter. You will get error message like:

Query failed.You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '\'1 ORDER BY lastname' at line 1 SELECT * FROM person_old WHERE id=\'1 ORDER BY lastname

If you get such error message, it is confirmed that you can hack website using this method and now you can move forward to hack website.

4. Run SQLI Helper on your Computer.








5. In target field, enter http://encycl.anthropology.ru/article.php?id=1 (the website url you just discovered as hackable) and hit on "Inject".

6. SQLI Helper will search for columns and you will have something like this:

7. Hit on "Get Database" to get:

8. Select any element from "Database Name" and click on "Get Tables".

9. Now, select element from table and hit on "Get Columns". I have selected "user" to get userid and password required for login.

10. Now, when you know "user" table has columns "usr_login" and "usr_pass", select them and hit on "Dump Now".

11. You will get values like these:

12. The values achieved are actually in hash and hence you have to crack these hashes to get userlogin and password to hack website. For this, go to http://www.md5crack.com/ and crack the hash using "Crack that hash baby" button. Thus, you are now able to hack website as you have got website user id and password. Once, you get admin password, you can easily hack website.
Thus friends, now, I hope you know how to hack website using SQL Helper. Note that using this method you cannot hack every website. SQL Helper will help you to hack website in easy way. If you have any problem in using
SQL Helper to hack website,please mention it in comments.


Enjoy SQL Helper to hack website...

If you like our post please share it with your friends.

Today I´m gonna show you how to use a usb pen drive as a virtual RAM.
The pen drive I used is a 2 Gb from Kingston. The size should be less than 4 Gb.
When you look at the sreenshots below you have to consider that it is in German.
Step 1:
Rename your pen drive  as "RAM DRIVE", so you can see that it is the one which is used as RAM.
Step 2:
Delete all the stuff one the pen drive. Look also after hidden once.

Step 3:
Right click on "My Computer" --> Properties

Step 4:
click on "Advanced" --> system output "Settings"

Step 5:

click on "Advanced" -->  "Edit"

Step 6:

Click on your thumb drive above  --> "user-defined size"  -->
you can see the size of your flash drive (in this case 1932 Mb)
calculate: size of flash drive - 5 Mb
in this case: 1932 - 5 = 1927
Now type this number in the first box. In the second box you type in the same number (see picture) -->
click "set" and "OK"

Step 7:
Click "Apply", click not "Cancel" or  "OK".
After you have clicked "Apply", click "OK".
Restart your computer.

Warning:
Don´t pull out your thumb drive after you made this settings, because it´s used as virtual RAM device. It may crash your computer if you pull out your thumb drive. I´m not responsible for thoose cases.

If your computer didn´t get really faster or you have other reasons to remove the USB thumb drive than take the following steps:

Go to step 6 and choose your USB thumb drive, than click "no swapfile" --> "Set" -->"OK" --> "Apply"

Check out how to turn flash/pen drive into virtual ram 

Hit +1 or LIKE on fb to thank us!

How to turn flash/pen drive into virtual ram

Hi Friendzz..Today I´m gonna show you how to turn flash/pen drive into virtual ram. It's not hard to turn an extra USB stick lying around that's collecting dust into extra memory for your computer, allowing it to run speedier and manage more applications better.

How to put a flash drive to good use by using it to increase the virtual RAM on your Windows computer.Using a USB drive smaller than 4 GB for this little trick. We've paraphrased some of the instructions for you below:

1. Rename your thumb drive as "RAM DRIVE" or something similar, so you can see which drive is being used as RAM.
2. Delete all the stuff on the flash drive. Check for hidden files.
3. Right click on My Computer, and go to Properties. Once there, click on Advanced and go to the system output's Settings.
4. Click on Advanced, and then Edit.
5. Click on your thumb drive above, and select "user-defined size." Here you can see the size of your flash drive.
6. Calculate the size of the flash drive, and subtract 5 Mb.
7. Type this number in the first box. In the second box, type in the same number.
8. Click Set and confirm all your settings, applying them wherever you can.
9. Restart your computer.

Windows 7 users should go into their System Properties, under the Performance tab for these options. After you're done, your computer will recognize your flash drive as extra virtual memory. Do not pull out your thumb drive after these settings are implemented. It could crash your computer. Instructables has the whole tutorial, with step-by-step screenshots below.

Use your USB flash drive as virtual RAM

How to Run Apple Mac OS X Inside Windows Using VirtualBox

Even if you're a Windows fan, you've probably thought about trying OS X. Maybe you'd like to test drive OS X before switching to a Mac or building a Hackintosh, or maybe you just want to run that one killer OS X app on your Windows machine. Whatever your reason, you can actually install and run OS X on any Intel-based Windows PC with a program called VirtualBox. Here's how.

Running OS X on your Windows desktop will take a bit of work, but it's pretty easy to do and the final product is awesome. To see what the whole setup will look like when you're done, check out the video above. Then, head to the instructions below to set it up for yourself.

What You'll Need

Before you start the installation process, you'll want to gather the following:

• A PC running 64-bit Windows with at least a dual-core processor and 4GB of RAM. Mountain Lion is 64-bit, and thus requires your copy of Windows to be 64-bit. If you're on a 32-bit version of Windows, you can install Snow Leopard instead. For more info, check out the difference between 32-bit and 64-bit operating systems. Note that your processor also needs to support VT-x. This list should help you find out whether yours does.
• VirtualBox and the VirtualBox Extension Pack: VirtualBox is our favorite virtualization tool for Windows, and it's completely free. VirtualBox doesn't officially support OS X, but it's actually very easy to get up and running. You should download the main program and the Extension Pack, which will give you support for USB devices.
• A hacked Mountain Lion disc image. Sadly, this won't work with a vanilla Mountain Lion installer, so you'll have to find a compatible hacked version. The hacking group Olarila has put a great installation ISO together, and you can find it by searching Google. If that doesn't sit well with you, you can head over to the Mac App Store and buy a legit copy for yourself, so you can at least pirate with a clear conscience.
• The HackBoot 1 and HackBoot 2 ISO files. These will help you boot into the installation.
• MultiBeast 4, which will help you get audio and other things working correctly after installation. You'll need to register for a free account over at Tonymacx86.com to download this. Make sure to download MultiBeast 4—it's labeled "Lion", but for our purposes the Lion version works better than the Mountain Lion version.

Step One: Install and Set Up VirtualBox

Before we install OS X, we'll need to set up VirtualBox so the OS X install disc can boot correctly. Here's what you need to do:

1. Start up VirtualBox and click the New button. Give your new virtual machine a name (I just called it "Mac OS X") and set the operating system to "Mac OS X Server (64-bit)".
   Full size

   
2. Click Next and choose how much RAM to give your virtual machine. This depends on how much RAM is in your system—you can get away with 2GB, but if you have more, give it more. 4GB of RAM should be a good amount, though I gave mine 6GB since I had RAM to spare.
   Full size

   
3. Click Next again, and choose "Create New Disk". Create your new disk in VDI format and with dynamically allocated storage. When you're done, VirtualBox should take you back to the main screen.
4. From here, right-click on your OS X machine in the left sidebar and click Settings. Go to the "System" section and uncheck "Enable EFI".
5. Click on the Storage section of the settings and click on the CD icon that says "Empty" under Storage Type. Then, click the CD icon next to the "CD/DVD Drive" dropdown, and select "Choose a Virtual CD/DVD Disk File". Choose the HackBoot 1 ISO and click OK.
   Full size

   

Now, your machine is ready to boot for the first time. Make sure you have your Mountain Lion ISO ready to go and proceed to the next step.

Step Two: Install OS X in VirtualBox

The next step involves actually installing OS X to your new virtual machine. When you're ready, start up VirtualBox and follow these instructions:

1. Select your OS X machine in VirtualBox's left sidebar and click the Start button in the toolbar. It'll bring you to the HackBoot boot screen, with one icon in the middle labeled HackBoot.
   Full size

   
2. Click on the CD icon at the bottom of the VirtualBox window and select "Choose a Virtual CD/DVD Disk File". This time, choose your hacked Mountain Lion ISO.
3. Go back to the HackBoot boot screen and press F5. It should reload the boot menu, this time showing you an "OS X Install DVD". Select this option and press Enter. After a moment, it'll take you to the OS X Installation screen.
4. After you choose your language and agree to the terms and conditions, you'll see that OS X doesn't detect any valid hard drives. To fix this problem, head up to the menu bar and go to Utilities > Disk Utility.
5. Click on your VirtualBox hard drive in the left sidebar, then click the Erase tab in Disk Utility's main pane. Give your drive a name (like "Macintosh HD") and click "Erase".
   Full size

   
6. Once Disk Utility has finished formatting your drive, you should see it show up in the left sidebar. When you do, exit Disk Utility and continue with the OS X installation as normal.

The rest of the installation should be pretty self-explanatory, and should go off without a hitch. It took me about 20 minutes to install OS X. When it finishes, it'll take you to a black screen with white text. At this point, you can click the "X" in the upper-right corner of the window to power off the virtual machine.

Step Three: Smooth Out the Rough Edges

You're almost there! You've installed OS X, but you'll still need to tweak a few things to get audio and graphics working properly. Here's what you need to do.

Fix Audio with MultiBeast

1. Open up VirtualBox and right-click on your OS X virtual machine in the left sidebar. Head back to its Settings and go to the Storage section. Once again, click on the disc icon on the right side of the window, this time choosing the HackBoot 2 ISO.
2. Click the Start button to reboot your virtual machine. You should see the HackBoot menu again, this time with an option to boot into your new virtual machine. Select that option and press Enter.
   Full size

   
3. After a minute, you should see the Mountain Lion desktop with the familiar galaxy wallpaper. Open up Safari, head to Tonymacx86.com, and download MultiBeast as described in the "What You'll Need" section.
4. Open up System Preferences > Security. Click the lock in the bottom left-hand corner, enter your password, and set the "Allow Applications" preference to "Anywhere". This will let you run apps from untrusted developers, which includes Multibeast.
5. Launch Multibeast. When you get to the Installation Type section, Choose the options pictured below:
   Full size

   
   Click continue and finish the Multibeast installation. It may take a few minutes.

Your audio won't work just yet, but we have a few other things we need to do before we restart.

Boot OS X Without HackBoot

In order to boot OS X without the HackBoot CD, we'll need to delete a problematic kext. You can do this through the following steps:

1. Open up the Finder and select Go > Go to Folder from the menu bar. Type in/System/Library/Extensions and press Enter.
2. In this folder, find the AppleGraphicsControl.kext file and delete it. This will allow your virtual machine to boot up without the HackBoot ISO.
   Full size

   
3. Click on the disc icon at the bottom of VirtualBox's window and uncheck the HackBoot 2 ISO, since you won't need it anymore.

Get Higher Resolution Virtual Machine

Lastly, you've probably noticed your VM is running at a pretty low resolution. That's totally lame, so we're going to make it run at the same resolution as our monitor with a few tweaks. To do so, just:

1. Head back to Go > Go to Folder and go to /Extra/. Double-click on theorg.Chameleon.boot.plist file and add the following to the bottom of the file, above the </dict> line:
   <key>Graphics Mode</key>
   <string>1920x1080x32</string>
   Save the file and close TextEdit. This allows OS X to start up with a higher resolution. Note that you can set whatever resolution you want; just replace 1920x1080 with the resolution you want.
2. If the resolution you picked is bigger than 1280x1024 and/or is widescreen, you'll need to do one last thing to get it working properly. Shut down your virtual machine and open Windows' Command Prompt. Type the following commands, hitting enter after each one:
   cd "C:\Program Files\Oracle\VirtualBox"
   vboxmanage setextradata "MyVirtualMachine" "CustomVideoMode1" "1920x1080x32"
   Replace the first line with the path to your VirtualBox program folder. In the second line, replace MyVirtualMachine with the name of your machine (in our case, "Mac OS X"), and 1920x1080x32 with the same resolution you added to your Chameleon plist.

When you're done, restart your OS X virtual machine and you should be greeted with a full-res desktop and working audio! You can now continue to install your favorite apps, set up your keyboard and mouse, and do anything else you like. You've got a fully working virtual Mac on your Windows desktop!

how to Active windows 7 license key

Hi friends. today im going to tell you how to Active windows 7 license key.
First download Removewat tool from here

Now follow my steps:
1. Open Removewat tool.
2. Then click on "Removewat" button.
3. After that Windows will automatically restart.
Now your Windows is genuine.

Thanks And If you like our post please share it with your friends.

How To Dual Boot Windows 7 And Windows 8

Do you want to test out the awesome new Windows 8 operating system but don’t want to lose everything you have customized on your Windows 7 OS? Windows 8 comes with an installer that give you the option of multi-booting, which is exactly what you want to do. Setting up a quick a easy way todual boot windows 7 and windows 8 isn’t hard to do. Here’s how:

One thing to note, this only works with Windows 7 and Vista. It will not work with XP.

Step 1: Back Your Stuff Up

Before you start the installation process you should at least back up your photos, videos, documents and any other settings or files that you think you might need later on. You never know what could happen during an installation process where you could potentially lose all your files. Windows 7 has a built in feature for backing up files. I would however, manually copy files over to an external hard drive for double backup.

Step 2: Partition Your Drive

You’ll need to create a partition of at least 16GB for the side by side Windows 8 installation. Type “disk management” in the Start button’s text box, which will display a “Create and format hard disk partitions” choice at the top of the Start panel. Click on that to open the Disk Management utility. You’ll probably have two partitions. Right-click on the largest one, and choose Shrink Volume from the context menu.

A “Querying Shrink Space” dialog will appear for a while, then another message will tell you how much free space can be squeezed out of the drive in MB. Enter a size above 16GB for the 32-bit version of Windows 8 and over 20GB for the 64-bit flavor, and then hit the Shrink button.

Step 3: Download The Installer

Now, it’s time to download the installer. As of this time, the only thing available is Windows 8 preview OS which you can get from Microsoft’s Windows 8 Release Preview ISO download page. Use Windows 7′s included disc image burning utility to create an installer DVD from the ISO file once you’ve downloaded it, or you can create a bootable USB key using the Windows 7 USB/DVD Download tool.

Step 4: Run The Windows 8 Installer

Pop in the installer DVD you burned or the USB stick you prepared, and restart your PC. Choose your language, then “Install Now.” After accepting the license, choose Custom installation. Now is when you’re presented with the choice of partitions, click “Drive options (advanced)” and then select the Unallocated space we created in step 2. Next, click New from the drive options icons below. Accept the full size displayed, and hit Apply.

Now we have a fresh partition to install Windows 8 onto. Hit Next and setup is off and running. Feel free to go grab some coffee or donuts while you’re waiting. Your system will then reboot into Windows 8 where you will setup your typical first-run options such as color, screen resolution, wifi and other settings. The next time you reboot your system you should see the startup screen as below where you can choose which operating system you would like to boot into.

By default, this screen displays for 30 seconds, and then Windows 8 launches. To change that default to your older OS, choose “Change defaults or other options” from the bottom of this multi-boot screen.

This should help you get your machine to dual boot windows 7 and windows 8. Let us know if you succeed or have any issues in the comments below.

How to hack a Gmail Account

Hello Friends, Let's start this tutorial with some quotes " If you follow the Universe, the Universe will spoil you,So always make your own ways, let's other follow it and spoil themselves."
Today i will explain you How to hack Gmail account step by step. In my previous article i have explained you the basic technique involved in hacking Gmail account or password but not explained that in extended way but today i will disclose you how the hackers really hack the gmail account or gmail password using fake pages or simply called Phish pages and the technique involved is called Phising.
NOTE: THIS IS FOR EDUCATIONAL PURPOSES ONLY. DON'T MISUSE IT. 

 

Things that we will need:

1. Phish pages for Gmail Website.
2. A Free web hosting server to upload these fake pages.
3. An Email account for sending mails. ( create one fake email account for this as your account can be banned for doing such things).
4. HTML format mail that has to be sent to user ( you can post your email ID's below if you need the original version of this HTML mail. And please don't put your credentials in reply of this message).
Note: By using this hack i have hacked more than 5000+ accounts of gmail, yahoo, facebook, hotmail etc...As Hacking is my passion and i love to do it for fun. But friends i never misused this and hope that you will also not do that. As this tutorial is for Educational purposes and i and isoftdl.com is not responsible if you have misused it.

Now friends first all you should know what is phishing and how it is done..

What is Phishing?

Phishing is a technique to hack passwords of any user by using phish pages. Now what are phish pages, in general, phish pages are the fake pages that look likes the same web page the only difference lies in the METHOD and ACTION codes. In original webpage you are directed to database to that website but in fake pages you are directed to program that writes the log file that consist of username and password of the user. In fake page method function directs you to a php program that writes the log and simultaneously it redirects to original website and copy the username in the username column of original website and it shows that you have entered a wrong password and when you enter the password again then you are entered into the original website. So the user will never know that his account has been hacked, he will only think that he has entered wrong password. So isn't its a good trick.

STEP BY STEP GUIDE TO HACK GMAIL ACCOUNT

1. Download the phish pages ( fake pages for Gmail).
Click here to download

2. Now Extract the folder . After extracting you will get two folders namely:
  a. Gmail.com ( For all countries)
  b. Gmail.de    (For Germany users)

3. Now open the Gmail.com folder. In this folder you will see three files namely:
  a. gmail.html
  b. mail.php
  c. log.txt
Gmail.html is the phish page that looks like original Gmail page, when user enters his credentials i.e. username and password, then it will be redirected to write.php file which will write username and password to log file and simultaneously redirect the user to original website, that will show you have entered wrong password.

4. Now Create a fake Gmail account for sending mails and creating account on free web hosting server.
How to create Gmail account without Phone verification?
Its pity simple to create Gmail account without Phone verification. At the time when you create new account, when you choose email ID (i.e. username ), choose it as much as unique or absurd that you can. Now create the account , gmail will not ask you for phone verification.

5. Now when you have created the fake account for testing this hack, you have to configure this email account setting. Login to fake Gmail account and click on settings. Then go to Accounts and Import and then in front of Send Email as  you will see edit info as shown in below snapshot.

 6. Now You have to create account on free Web Hosting website. The website that i will use to explain is www.t35.com. When you open the website there you will see a button "START UR WEBSITE" click on that. Now you will see new page there enter the credentials and create account. Then go to your fake email address and validate the account.

7. Now login into your account in t35.com and Now click on New Directory as shown below:

Then do as shown in this snapshot:

After confirming go back to main directory as shown:

Now double click on Gmail folder on t35.com that we have created in previous step. Now you will be inside the Gmail Directory. Then click on Upload button as shown is figure:

Now after confirming the files upload go back to main Gmail directory. Now there you will see three files and click on the open  in front of gmail.html file as shown below:

Now you will see the something awesome below:

8. Now we have created the fake page but its detectable. Let's make it more undetectable. For that go to the following website and copy the link in the URL box and Click on Next. As shown below:

Now after that enter domain name her like gmailvalidation.tk or gmail verify.tk or anything similar to that as shown... 

 

Now click Below to confirm as shown:

Now open the sample website you will see :(Click here)

9. Now Creation Part is over, now we have our link that we will send to the user. Now How we will send it to user. Open your fake email account that you have created in step 5 and step 6. Click on Compose mail and In Subject Enter "Notice: Please Verify your Gmail Account" ( without quotes).

And in body write something like that we have seen illegal activity from your account. please verify your account within three days other we have to lock your email account. For verifying visit here www.gmail.com and hyperlink link your fake mail address and send it to user.

 If you want to get the Original Mail, post your Email ID below in comment. I will mail you the original mail directly to your email. We can't disclose it directly on website.

10. Now just wait one day or few hours till user enters his credentials.(depends how fast the user reacts to the email). Once the user logs in to his Gmail account using your Phisher, his user ID and password are ours..And these are stored in log.txt What you have to do is just refresh your Web hosting account files. 

11. The Log.txt file will contain the passwords and look like this:

Thats all Now you have hacked the password of victim. I hope you all have Liked It. 

How to Protect Your Gmail Account From Phisher??

1. Always check the URL in the address bar before entering username and password.

2. Never follow any link from your email and any website until u have confirmed the Address bar URL.

3. Never Follow spam mails and "Win lottery or Cash" mails.

If you have Any Queries Ask me in form Of Comments ...  Enjoy and have Happy hacking.